MKB-S Four Pass Automatic Solid Fuel Boiler
- It is suitable for use for individual or cenrtal use with capacity options from 25.000 kcal / h to 60.000 kcal / h.
- It is designed to use fuel options such as hazelnut charcoal, prina, hazelnut shell.
- Ability to set and monitor the degree of heating water in the system with digital display.
- The 4-pass combustion chamber design uses the heat from the fuel at the highest level, resulting in increased boiler efficiency.
- Ability to monitor loading and waiting times from the digital display by adjusting from the electronic control panel.
Low Fuel – High Efficiency
MKK4-S Series Boilers are designed to combust low-calorie domestic coal and wood type fuels with high efficiency and environmental friendliness thanks to its four-pass design. With fan controlled combustion system, the ratio of unburned coal is very low because all the fuel comes into contact with air. Full combustion occurs with the secondary air ducts located in the combustion chamber. With its automatic fuel loading feature, it burns fuels up to 20 mm diameter with high efficiency. Special body design saves energy. The combustion air from the peripheral surfaces of the combustion chamber ensures that the coil burns homogeneously. Extremely silent running speed controlled flapped fan ensures maximum efficiency. The abrasions to be formed with warming up are at minimum level with cast combustion chamber. Wet rotor, 3 speed step circulation pump provides energy saving by providing circulation at desired debit. High efficiency with smoke duct design.The air required for full combustion of the fuel and the highest efficiency from the fuel used, is made by the fan, which is extremely quiet and controlled by thermostat controller.
Safe
- Safe use against overheating by safety thermostat.
- Ability to monitor loading and waiting times from the digital display by adjusting from the electronic control panel.
- With the automatic loading feature, ashes are poured into the ash drawer.
- When the fuel in the fuel loading tank is completely exhausted and the system temperature falls below 25 ° C, device automatically switches itself off to stop unnecessary working of the fan, pump and load motor.
- The fuel setting is made with two buttons on the control panel, one button sets the waiting time, other sets loading time and both setting times of buttons can be monitored on the lighted electronic display. This adjustment system allows the user to set the device very easily and with the desired precision.
- The negativities such as flame extinguishing has been abolished when the fuel load is made by helezone from the bottom.
- Approval of conformity with European standards with CE certificate.
